Induction Motor Starting With DC Link

Document Type : Original Article

Authors

1 Imam Hossein university

2 maritime university- emam khamanei

Abstract

In this paper, the basic formulas of a three-phase induction motor are extracted and by Park_ Transfer Matrix are converted to dq space, then in m_file MATLAB software, are modeled and simulated. The aforementioned three-phase induction motor using cascade control and by A battery is set up and operated and controlled at different speeds. In the end, different diagrams of three-phase induction motor are presented in different working conditions. After carefully examining of the diagrams of three-phase induction motorو proves the accuracy of the proposed control method and its simulations.

performance diagrams show that using the proposed control method, the motor can easily follow the reference speeds in the fastest possible time, which proves the accuracy of the modeling and simulations performed.

By controlling the speed of induction motors, application of Direct Current motors in Navy of the Islamic Republic of Iran vessels, which are very expensive to maintain, can be eliminated.

Keywords

Main Subjects


  1. 1. Jabbour, N., Tsioumas, E., Mademlis, C., and Solomin, E., "A Highly Effective Fault-Ride-Through Strategy for a Wind Energy Conversion System With a Doubly Fed Induction Generator", IEEE Transactions on Power Electronics, Vol. 35, No. 8, (2020), 8154–8164. doi:10.1109/TPEL. 2020.2967971
  2. Gontijo, G. F., Tricarico, T. C., Franca, B. W., da Silva, L. F., van Emmerik, E. L., and Aredes, M., "Robust Model Predictive Rotor Current Control of a DFIG Connected to a Distorted and

Unbalanced Grid Driven by a Direct Matrix Converter", IEEE Transactions on Sustainable Energy, Vol. 10, No. 3, (2019), 1380–1392. doi:10.1109/TSTE.2018.2868406

  1. Esfandiari, G., Ebrahimi, M., and Tabesh, A., "Instantaneous Torque Control Method With Rated Torque-Sharing Ratio for Cascaded DFIMs", IEEE Transactions on Power Electronics, Vol. 32, No. 11, (2017), 8671–8680. doi:10.1109/TPEL.2017.2650211
  2. Norouzia, S., Ghoreishy, H., Ale Ahmad, A., and Tahami, F., "A New Variable Frequency Zero Voltage Switching Control Method for Boost Converter Operating in Boundary Conduction Mode", International Journal of Engineering, Transaction B: Applications, Vol. 33, No. 11, (2020), 2222–2232. doi:10.5829/ije.2020.33.11b.14
  3. Sun, D., Wang, X., Nian, H., and Zhu, Z. Q., "A Sliding-Mode Direct Power Control Strategy for DFIG Under Both Balanced and Unbalanced Grid Conditions Using Extended Active Power", IEEE Transactions on Power Electronics, Vol. 33, No. 2, (2018), 1313–1322. doi:10.1109/TPEL.2017.2686980
  4. Liu, Y., Xu, W., Zhi, G., and Zhang, J., "Performance Analysis of a Stand-alone Brushless Doubly-fed Induction Generator Using a New T-type Steady-state Model", Journal of Power Electronics, Vol. 17, No. 4, (2017), 1027–1036 .doi:https://doi.org/10.6113/JPE.2017.17.4.1027
  5. Sadeghi, R., Madani, S. M., and Ataei, M., "A New Smooth Synchronization of Brushless Doubly-Fed Induction Generator by Applying a Proposed Machine Model", IEEE Transactions on Sustainable Energy, Vol. 9, No. 1, (2018), 371–380. doi:10.1109/TSTE.2017.2734964
  6. Kou, P., Liang, D., Li, J., Gao, L., and Ze, Q., "Finite-Control-Set Model Predictive Control for DFIG Wind Turbines", IEEE Transactions on Automation Science and Engineering, Vol. 15, No. 3, (2018), 1004–1013. doi:10.1109/TASE.2017.2682559
  7. Chen, J., Zhang, W., Chen, B., and Ma, Y., "Improved Vector Control of Brushless Doubly Fed Induction Generator under Unbalanced Grid Conditions for Offshore Wind Power Generation", IEEE Transactions on Energy Conversion, Vol. 31, No. 1, (2016), 293–302. doi:10.1109/TEC.2015.2479859
  8. Khateri-abri, S., Tohidi, S., and Rostami, N., "Improved Direc Power Control of DFIG Wind Turbine by using a Fuzzy Logic Controller", 2019 10th International Power Electronics, Drive Systems and Technologies Conference (PEDSTC), (2019), 458– 463. doi:10.1109/PEDSTC.2019.8697581
  9. Douadi, T., Harbouchea, Y., Abdessemed, R., and Bakhti, I., "Improvement Performances of Active and Reactive Power Control Applied to DFIG for Variable Speed Wind Turbine Using Sliding Mode Control and FOC", International Journal of Engineering, Transactions A: Basics, Vol. 31, No. 10, (2018), 1689–1697. doi:10.5829/ije.2018.31.10a.11
  10. Hussien, M. G., Liu, Y., and Xu, W., "Robust position observer for sensorless direct voltage control of stand-alone ship shaft brushless doubly-fed induction generators", CES Transactions on Electrical Machines and Systems, Vol. 3, No. 4, (2019), 363–376. doi:10.30941/CESTEMS.2019.00048
  11. Pichan, M., Rastegar, H., and Monfared, M., "Fuzzy-based direct power control of doubly fed induction generator-based wind energy conversion systems", 2012 2nd International EConference on Computer and Knowledge Engineering (ICCKE), (2012), 66–70. doi:10.1109/ICCKE.2012.6395354
  12. Rodrigues, L. L., Vilcanqui, O. A. C., Murari, A. L. L. F., and Filho, A. J. S., "Predictive Power Control for DFIG: A FAREBased Weighting Matrices Approach", IEEE Journal of Emerging and Selected Topics in Power Electronics, Vol. 7, No. 2, (2019), 967–975. doi:10.1109/JESTPE.2019.2898924
  13. Xu, W., Gao, J., Liu, Y., and Yu, K., "Model predictive current control of brushless doubly-fed machine for stand-alone power generation system", IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, (2017), 322–327. doi:10.1109/IECON.2017.8216058
  14. Xu, W., Hussien, M. G., Liu, Y., and Allam, S. M., "Sensorless Control of Ship Shaft Stand-Alone BDFIGs Based on Reactive-Power MRAS Observer", IEEE Journal of Emerging and Selected Topics in Power Electronics, Vol. 9, No. 2, (2021), 1518–1531. doi:10.1109/JESTPE.2019.2963264