A brief review on mechanical noise of vessels

Document Type : Review

Author

imam khamenei university. science college. basic science department.

Abstract

Noise is unwanted sound in the ocean, since it generally, interferes with the operation of sonar or other underwater sound registration equipment. The principal sources of radiated sound from ships are (1) the propulsion system; (2) the propeller; (3) the auxiliary machinery; (4) the hydrodynamic effects and (5) the hull movements. One of the sources of artificial noise in the sea environment is the noise from the machines inside the vessels. This noise is caused by the inherent vibration of mechanical systems. The presence of small instabilities along with the forces and torques that produce the work creates vibrations that are eventually transmitted to the radiation surfaces and are therefore a source of noise. This type of noise is caused by the following 5 factors: mechanical unbalances, electromagnetic force fluctuations, impact sounds, piston sound in reciprocating machines and bearing noise. In this article, we only examine the noise generated by a floating machine and describe the frequency range as well as the noise level produced.

Keywords

Main Subjects


[1] Knudsen, V.O., Alford, R.S and Emling, J.W., Underwater ambient noise, J. Marine
Res., 7, 410, 1948.
[2] Wenz, G.M., Acoustic ambient noise in the ocean: Spectra and sources, J. Acoust. Soc.
Amer., 34, (12), 1936, 1962.
[3] Alvarez, F.F., Noise and Vibration Problems of Reciprocating Machinery, M.LT. Dept. of Naval Arch, and Mar. Engin., M.S. Thesis, May 1 9 6 4; results exerpted in Bolt Beranek and Newman Rept. 1139, 1964.
[4] Gray, L.M. and Greeley, D.S., Source level model for propeller blade rate radiation for the world’s merchant fleet, J. Acoust. Soc. Amer., 67, (2), 516, 1980.  
[5] Ross, D., Mechanics of Underwater Noise, Pergamon Press, 1987.
[6] Klyukin, I.I., Control of Noise and Sonic Vibration in Ships, Sudpromgiz, Leningrad, 1961 ; translation, U.S. Dept. of Commerce, washington, 1963.
[7] Biezeno, C.B. and Grammel, R., Engineering Dynamics: Vol. 4, Internal Combustion Engines, Blackie and Son, London, 1 9 5 4 .
[8] Rosen, M.W., T h e noises o f t w o spur-gear transmissions, Noise Control, 7, 6, 11-19, 1 9 6 1 ; also, U.S. Naval Ord. Test Station Repts. NA VORD 6569 and 6594, 1959.
[9] Attia, A.Y., Effect of change of pitch o n gear noise , Sound and Vibr., 18, 129 - 137 , 1971 .
[10] Nakamura, K., Experimental studies about the effects of dynamic loads upon gear noise, Bui Japan Soc. Mech. Engin., 10(31), 180 - 188 , 1967.
[11] Moeller, K.G.F., "Gear Noise and "Bearing Noise," Chapters 23 and 24 of Handbook of Noise Control, CM . Harris (Ed.), McGraw-Hill, New York, 1957.
[12] Haddad, S.D. and Pullen, H.L., Piston slap as a source o f noise and vibration in diesel engines. Sound and Vibr., 34, 249 - 260 ,1964.
[13] Ungar, E.E. and Ross, D., Vibrations and noise due to piston-slap in reciprocating m a c h i n e r y. Sound and Vibr., 2, 132 - 146, 965; also. Bolt Beranek and Newman, Inc. Rept. 1106, 1964 .
[14] Hempel, W., Does Turbocharging Increase Diesel Engine Noise? - Observations on the Generation, Emission and Reduction of Diesel Engine Noise, Paper 680406, Soc. of Automotive Engin., May 1968.
[15] Priede, T., Noise of diesel engine fuel injection equipment, Sound and Vibr., 6, 443-459, 1967.
[16] Tamura, A. and Taniguchi, O., On the subharmonic vibration of order one-half caused by passing balls in a ball bearing, Bui Japan Soc. Mech. Engin., 4 (14), 193 - 200, 1961, and 4(15), 482 - 488, 1961.