[1] Perez, T., and Blanke, M., “Ship roll damping control,” Annual Reviews in Control, Vol. 36, 2012, pp. 129-147.
[2] Perez, T., “Ship motion control: Course keeping and roll stabilization using rudder andfins,” Advances in Industrial Control. Springer, 2005.
[3] Liang, L., Zhao, P., Zhang, S., Ji, M., and Yuan, J., “Simulation analysis of fin stabilizer on ship roll control during turning motion,” Ocean Engineering, Vol. 164, 2018, pp. 733-748.
[4] Weilin, L., Bingbing, H., and Tieshan, L., “Neural network based fin control for ship roll stabilization with guaranteed robustness,” Neurocomputing, Vol. 230, 2017, pp. 210-218.
[5] Liang, L., Zhao, P., Zhang, S. and Yuan, J., “Simulation analysis of fin stabilizers on turning circle control during ship turns,” Ocean Engineering, Vol. 173, 2019, pp. 174-182.
[6] Froude, W., “On the rolling of ships,” Trans. of the Institution of NavalArchitects, Vol. 2, 1861, pp. 180–227.
[7] Froude, W., Abell, W., Gawn, R., and Duckworth, A., “The papers of William Froude,” MA, LL. D., FRS, 1810-1879: Institution of Naval Architects, 1955.
[8] Vasta, J., Giddings, A., Taplin, A., and Stilwell, J., “Roll stabilization by means of passivetanks,” Soc. Nav. Archit. Mar. Eng., Trans, Vol. 69, 1961, pp. 411-460.
[9] Watts, P., “On a method of reducing the rolling of ships at sea,” Trans. INA, Vol. 24., 1883.
[10] Watts, P., “The use of water chambers for reducing the rolling of ships at sea,” Trans. of the Institution of Naval Architects, Vol. 26., 1885.
[11] EC, S., “The automatic stabilization of ships,” Nature, Vol. 130, 1932, p. 528.
[12] Schlick, O., “Gyroscopic effects of flying wheels on board ships,” Transactions of the Institution of Naval Architects INA, 1904.
[13] Taggart, R., “Anomalous behavior of merchant ship steering systems,” Marine Technology, Vol. 7, 1970, pp. 205-214.
[14] Monk, K. “A warship roll criteria,” Trans. RINA, London, UK, 1987.
[15] Lloyd, A., “Roll stabilizer fins: A design procedure,” Transactions of the Royal Institution of Naval Architects, Vol. 117, 1975, p. 233.
[16] Lloyd, A., “Seakeeping: ship behaviour in rough weather,” Ellis Horwood Series in Marine Technology, Ellis Horwood, 1989.
[17] Perez, T., and Goodwin, G., C., “Constrained predictive control of ship fin stabilizers toprevent dynamic stall,” Control Engineering Practice, Vol. 16, 2008, pp. 482-494.
[18] Frahm, H., “Results of trials of the anti‐rolling tanks at sea,” Trans. of the Institution of Naval Architects, Vol. 53, 1911.
[19] Minorsky, N., “Problems of anti‐rolling stabilization of ships by the activated tankmethod,” American Society of Naval Engineers, Vol. 47, 1935.
[20] Gawad, A., F., A., Ragab, S., A., A., Nayfeh, H., and Mook, D., T., “Roll stabilization byanti-roll passive tanks,” Ocean Engineering, Vol. 28, 2001, pp. 457-469.
[21] Perez, T., and Steinmann, P., D., “Analysis of ship roll gyrostabiliser control,” IFAC Proceedings Volumes, Vol. 42, 2009, pp. 310-315.
[22] Allan, J., “The stabilization of ships by activated fins,” Trans. Inst. Naval Architects, Vol. 87, 1945, pp. 123-159.
[23] Lloyd, A., “Roll stabilizer fins: A design procedure,” Transactions of the Royal Institution of Naval Architects, Vol. 117, 1975, pp. 233-242.
)