[1] Masoud Zarezadeh, Nowrouz Mohammad Nouri, Reza Madoliat, "Position parameters optimization of surface piercing propeller by artificial neural network," scientific reports, vol. 14, no. 2295, pp. 1162-1190, 27 January 2024. DOI:
10.1038/s41598-024-52325-8
[2] Javanmard, Ehsan, Yari, Ehsan, Mehr, Javad A, "Numerical investigation on the effect of shaft inclination angle on hydrodynamic characteristics of a surface-piercing propeller,"
Applied Ocean Research, vol. 98, 2020. DOI:
10.1016/j.apor.2020.102108
[3] Yari E., Ghassemi H. Hydrodynamic analysis of the surface-piercing propeller in unsteady open water condition using boundary element method [J]. International Journal of Naval Architecture and Ocean Engineering, 2016, 8(1): 22–37.
https://doi.org/10.1016/j.ijnaoe.2015.09.002
[4] Matveev, K.I., Wheeler, M.P., Xing, T., Numerical simulation of air ventilation and its suppression on inclined surface-piercing hydrofoils, Ocean Engineering, 175, 2019, 251-61. DOI:
10.1016/j.oceaneng.2019.02.040
[5] Ali Amini , Nowrouz Mohammad Nouri, Aria Abedi ,Maryam Kamran, "Performance improvement of surface piercing propeller at low advance coefficients by aeration,"
Ocean Engineering, vol. ۲۳۸, pp. 34-55, ۲۰۲۱.
10.1016/j.oceaneng.2021.109551
[6] Seyyed Mostafa Seyyedi, Rouzbeh Shafaghat ,Negin Donyavizadeh, "A Review on the Hydrodynamic Characteristics of the SPP Concerning to the Available Experimental Data and Evaluating Regression Polynomial Functions,"
International Journal of Maritime Technology (IJMT), vol. 10, pp. 25-38, 2018.
10.29252/ijmt.10.25
[7] Abdorreza Yousefi, Rouzbeh Shafaghat, "Numerical study of the parameters affecting the formation and growth of ventilation in a surface-piercing propeller,"
Applied Ocean Research, vol. 104, pp. 56-72, 2020. DOI:
10.1016/j.apor.2020.102360
[8] M. Tadros, M. Ventura, C. Guedes Soares, "Optimization procedures for a twin controllable pitch propeller of a ROPAX ship at minimum fuel consumption,"
Journal of Marine Engineering and Technology (JMET) , vol. 22, no. 4, pp. 167-175, 2022.
doi.org/10.1080/20464177.2022.2106623
[9] Yousefi, A. & Shafaghat, R. Numerical study of the parameters affecting the formation and growth of ventilation in a surfacepiercing propeller.
Appl. Ocean Res. 104, 102360 2020,
https://doi.org/10.1016/j.apor.2020.102360
[10] Abbas Dashtimanesh, Mohammad Hossein Ghaemi, Youjiang Wang, Rasul Niazmand Bilandi, Spyros Hirdaris, "Digitalization of High Speed Craft Design and Operation Challenges and Opportunities," in
3rd International Conference on Industry 4.0 and Smart Manufacturing, Shanghai, China, 2022, DOI:
10.1016/j.procs.2022.01.254.
[11] Seyyedi, Seyyed Mostafa, Shafaghat, Rouzbeh, "A review on the Surface-Piercing Propeller: Challenges and opportunities,"
Proceedings of the Institution of Mechanical Engineers Part M: Journal of Engineering for the Maritime Environment,Volume 234, Issue 4, , pp. 743 - 770, 2020, · DOI:
10.1177/1475090220906917
[12] S. Y. Sun and G. X. Wu, “Local flow at plate edge during water entry,” Phys.Fluids 32, 072103 (2020), DOI:
10.1063/5.0013914
[14] Chang, Shengming, Wang, Chao, Sun, Cong, Ding, Enbao, "Optimization design of surface piercing propeller blade profile based on TOPSIS method," Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition), vol. 51, no. 10, pp. 57 - 63, 2023.
[15] Nouroozi, H., Zeraatgar, H., A, "reliable simulation for hydrodynamic performance prediction of surface-piercing propellers using URANS method,"
Applied Ocean Research, vol. ۹۲, ۲۰۱۹, DOI:
10.1016/j.apor.2019.101939
[16] Pakian Bushehri, M., Golbahar Haghighi, M., "Experimental and numerical analysis of Hydrodynamic Characteristics of a surface piercing propeller mounted on high-speed craft," International Journal of Maritime Technology, vol. 15, pp. 79-91, 2021.
[17] Yari, E., Moghadam, A.B, "BEM applied to the cup effect on the partially submerged propeller performance prediction and ventilation patte," Journal of Applied and Computational Mechanic, pp. ۳۹۲-۴۰۵, ۲۰۲۴., DOI: 10.22060/mej.2016.662
[18] Kamran, M., Nouri, N., Askarpour, H, "Numerical Investigation of the Effect of Trailing Edge Shape on Surface-Piercing Propeller Performa,"
Applied Ocean Research, vol. ۱۲۵, pp. ۱۰۵-۱۲۲, ۲۰۲۲, DOI:
10.1016/j.apor.2022.103230
[19] Shuai Sun, Chao Wang, Chunyu Guo,Yuan Zhang,Pengfei Liu, "Numerical study of scale effect on the wake dynamics of a propeller,"
Ocean Engineering, vol. ۱۹۵, no. ۱۵, ۲۰۲۰, DOI:
10.1016/j.oceaneng.2019.106810.
[20] Siamak Alimirzazadeh, Saeed Zabihzade Roshan, Mohammad Saeed Seif, "Unsteady RANS simulation of a surface piercing propeller in oblique flow,"
Applied Ocean Research, vol. ۵۶, pp. 79-91, ۲۰۱۶, DOI:
10.1016/j.apor.2016.01.003
[21] Biao Huang, Si-cong Qiu, Qin Wu, Guo-yu Wang, "A review of transient flow structure and unsteady mechanism of cavitating flow," Journal of Hydrodynamics, vol. ۳۱, p. 429–444, ۲۰۱۹,DOI:
10.1007/s42241-019-0050-0
[22]
Yang, D., Numerical analysis on the hydrodynamic performance of an artificially ventilated surface-piercing propeller, Water, 10(11), 2018, DOI:
10.3390/w10111499
[23] N. Javanmardi and P. Ghadimi, “Hydroelastic analysis of surface piercing hydrofoil during initial water entry phase,” Sci. Iran. 26,295–310 (2019), DOI:
10.24200/sci.2017.20010
[24] Amini, A., Nouri, N.M., Niazi, S., Abedi, A., A Numerical Study on Surface-piercing Propellers using Sliding Mesh Method via Openfoam Software, Iranica Journal of Energy & Environment, 14(4), 2023, 415-22, doi: 10.5829/ijee.2023.14.04.11.
[25] Wheeler, M.P., Matveev, K.I., Numerical Modeling of Surface-Piercing Flexible Hydrofoils in Waves, Journal of Ship Research, 67(02), 2023, 140-9, DOI:
10.3390/jmse11020246
[26] Gao, Z., Numerical analysis on the effect of artificial ventilated pipe diameter on hydrodynamic performance of a surface-piercing propeller, Journal of Marine Science and Engineering, 7(8), 2019, 240, DOI:
10.3390/jmse7080240
[27] Javanmard, E., Yari, E., Mehr, J.A., Mansoorzadeh, S., Hydrodynamic characteristic curves and behavior of flow around a surface-piercing propeller using computational fluid dynamics based on FVM, Ocean Engineering, 192, 2019, 106445.
[28] Wajdi Rajhi, Ahmed Mohamed Mahmoud Ibrahim, Abdel-Hamid I. Mourad ,Mohamed Boujelbene , Manabu Fujii ,Ammar Elsheikh , "Prediction of milled surface characteristics of carbon fiber-reinforced polyetheretherketone using an optimized machine learning model by gazelle optimizer,"
Measurement, vol. 222, no. 30, pp. 25-41, 2023,
doi.org/10.1016/j.measurement.2023.113627
[29] Rajhi, W.
et al. Prediction of milled surface characteristics of carbon fiber-reinforced polyetheretherketone using an optimized machine learning model by gazelle optimizer.
Measurement 222, 113627 (2023), DOI:
10.1016/j.measurement.2023.113627
[30] Wang Z., Huang B., Zhang M. et al. Experimental and numerical investigation of ventilated cavitating flow structures with special emphasis on vortex shedding dynamics [J].
International Journal of Multiphase Flow, 2018, 98: 79–95, DOI:
10.1016/j.ijmultiphaseflow.2017.08.014
[31] Chen T., Huang B., Wang G. et al. Numerical investigation of thermo-sensitive cavitating flows in a wide range of free-stream temperatures and velocities in fluoroketone [J].
International Journal of Heat and Mass Transfer, 2017, 112: 125–136,
doi.org/10.1016/j.ijheatmasstransfer.2017.04.023
[32] Wang Y., Xu C., Wu X. et al. Ventilated cloud cavitating flow around a blunt body close to the free surface [J].
Physical Review Fluids, 2017, 2(8): 084303, DOI:
10.1103/PhysRevFluids.2.084303
[33] Xiang M., Cheung S., Tu J. et al. Numerical research on drag reduction by ventilated partial cavity based on two-fluid model [J].
Ocean Engineering, 2011, 38(17–18): 2023–2032,
doi.org/10.1016/j.oceaneng.2011.09.013
[34] Liu T., Huang B., Wang G. et al. Experimental investigation of ventilated partial cavitating flows with special emphasis on flow pattern regime and unsteady shedding behavior around an axisymmetric body at different angles of attack [J]. Ocean Engineering, 2018, 147: 289–303.
[35] Wu Q., Wang C., Huang B. et al. Measurement and prediction of cavitating flow-induced vibrations [J]. Journal of Hydrodynamics, 2018, 30(6): 1064–1071, doi.org/10.1007/s42241-018-0115-5
[36] Wu Q., Huang B., Wang G. et al. Numerical modelling of unsteady cavitation and induced noise around a marine propeller [J].
Ocean Engineering, 2018, 160: 143–155,
doi.org/10.1016/j.oceaneng.2018.04.028
[38] Zhang H., Wu Q., Li Y. et al. Numerical investigation of the deformation characteristics of a composite hydrofoil with different ply angles [J].
Ocean Engineering, 2018, 163: 348–357,
doi.org/10.1016/j.oceaneng.2018.05.064.
[39] Long Y., Long X. P., Ji B. et al. Verification and validation of URANS simulations of the turbulent cavitating flow around the hydrofoil [J].
Journal of Hydrodynamics, 2017, 29(4): 610–620,
doi.org/10.1016/S1001-6058(16) 60774-6
[40] Liu M., Tan L., Liu Y. et al. Large eddy simulation of cavitation vortex interaction and pressure fluctuation around hydrofoil ALE 15 [J].
Ocean Engineering, 2018, 163: 264–274,
oi.org/10.1016/j.oceaneng.2018.06.005
[41] Alimirzazadeh S., Roshan S. Z., Seif M. S. Unsteady RANS simulation of a surface piercing propeller in oblique flow [J].
Applied Ocean Research, 2016, 56: 79–91, DOI:
10.1016/j.apor.2016.01.003
[42] Zhang M., Chen H., Wu Q. et al. Experimental and numerical investigation of cavitating vortical patterns around a Tulin hydrofoil [J].
Ocean Engineering, 2019, 173: 298–307, DOI:
10.1016/j.oceaneng.2018.12.064
[43] Zhang M., Chen H., Wu Q. et al. Experimental and numerical investigation of cavitating vortical patterns around a Tulin hydrofoil [J]. Ocean Engineering, 2019, 173: 298–307.
[44] Wang C. C., Huang B., Wang G. Y. et al. Numerical simulation of transient turbulent cavitating flows with special emphasis on shock wave dynamics considering the water/vapor compressibility [J]. Journal of Hydrodynamics, 2018, 30(4): 573–591, doi.org/10.1007/s42241-018-0058-x
[45] Long Y., Long X., Ji B. et al. Verification and validation of URANS simulations of the turbulent cavitating flow around the hydrofoil [J]. Journal of Hydrodynamics, 2017, 29(4): 610–620, Doi.org/10.1016/S1001-6058(16)60774-6
[46] Long Y., Long X., Ji B. et al. Verification and validation of large eddy simulation of attached cavitating flow around a Clark-Y hydrofoil [J].
International Journal of Multiphase Flow, 2019, 115: 93–107, DOI:
10.1016/j.ijmultiphaseflow.2019.03.026
[47] Park J., Seong W. Novel scaling law for estimating propeller tip vortex cavitation noise from model experiment [J].
Journal of Hydrodynamics, 2017, 29(6): 962–971, DOI:
10.1016/S1001-6058(16)60810-7
[48] Wu Q., Huang B., Wang G. et al. Numerical modelling of unsteady cavitation and induced noise around a marine propeller [J].
Ocean Engineering, 2018, 160: 143–155,
10.1016/j.oceaneng.2018.04.028
[49] Aursand, M., P. J. Haagensen, and B. H. Skallerud. 2023. “Remaining Fatigue Life Assessment of Corroded Mooring Chains Using Crack Growth Modelling.” Marine Structures 90: 103446,
doi.org/10.1016/j.marstruc.2023.103446
[50] Bui, T. Q., and X. Hu. 2021. “A Review of Phase-Field Models, Fundamentals and Their Applications to Composite Laminates.” Engineering Fracture Mechanics 248, DOI:
10.1016/j.engfracmech.2021.107705
[51] S. Y. Sun and G. X. Wu, “Oblique water entry of an inclined finite plate with gravity effect,” Phys. Fluids 35, 042112 (2023),
/doi.org/10.1063/5.0147309
)